Call us on:
+44 (0)1453 882736
sales@staitech.com

    Project Description

    HST20 steam traps

    Blue HST20

    The HST20 is a low cost thermostatic trap designed for high purity steam applications. Wetted parts are manufactured from 316L stainless steel with a maximum surface finish of 1.0 micron Ra. The HST20 is available with either clamped (HST20) or screwed body joint (HST20SC).

    Size range1/2″ – 1″ ASME BPE compliant clamp and weld connections
    DN8 – DN25 DIN & ISO clamp and weld connections
    1/2″ & 3/4″ twin-lock ferrules
    Material316L stainless steel
    OptionsFor installations with restricted clearance, Low profile elbows are available in a range of sizes, with both weld and clamp system connections.
    Literature
    HST20SC steam traps

    Blue HST20SC

    The HST20SC shares the same internals and operating characteristics as the HST20, but has a screwed body body joint with o-ring seal. This design feature results in one of the most compact high purity steam traps available from any manufacturer.

    Size range1/2″ – 1″ ASME BPE compliant clamp and weld connections
    DN8 – DN25 DIN & ISO clamp and weld connections
    1/2″ & 3/4″ twin-lock ferrules
    Material316L stainless steel
    OptionsFor installations with restricted clearance, Low profile elbows are available in a range of sizes, with both weld and clamp system connections.
    Literature
    HST30 steam traps

    Blue HST30

    The HST30 range of steam traps is designed to remove condensate from high purity steam systems. A thermostatic element is used to detect the difference between the temperature of the cooling condensate and the system operating temperature. When this temperature differential exceeds 3-5ºC the element contracts to allow the cooling condensate to exhaust.

    Size range1/2″ – 1 1/2″ ASME BPE compliant clamp and weld connections
    DN8 – DN40 DIN & ISO clamp and weld connections
    Material316L stainless steel
    OptionsHorizontal inlet connection
    Enhanced surface finishes and electropolishing
    Alternative materials – low ferrite stainless steel (WN1.4435)
    For installations with restricted clearance, Low profile elbows are available in a range of sizes, with both weld and clamp system connections.
    Literature
    HST30TC steam traps

    Blue HST30TC

    Whilst the HST30TC shares the same internals and operating characteristic as the HST30, the body joint is a standard clamp connection. This allows easy strip-down for cleaning or maintenance. It has a higher internal surface finish specification of 0.5 microns Ra. The HST30TC is available with clamp connections in sizes 1/2″ to 1-1/2″. Where space is restricted the HST30TC is available with horizontal inlet.

    Size range1/2″ – 1 1/2″ ASME BPE compliant clamp and weld connections
    DN8 – DN40 DIN & ISO clamp and weld connections
    Material316L stainless steel
    OptionsHorizontal inlet connection
    Enhanced surface finishes and electropolishing
    Alternative materials – low ferrite stainless steel (WN1.4435)
    For installations with restricted clearance, Low profile elbows are available in a range of sizes, with both weld and clamp system connections.
    Literature
    HST50 steam traps

    Blue HST50

    The HST50 Thermodynamic steam trap is intended for use in constant pressure applications such as mains drainage where space is restricted. The HST50 can be installed in any orientation.

    Size range1/2″ – 1″ ASME BPE compliant clamp and weld connections
    1/2″ & 3/4″ ASME BPE compliant tube weld connections
    Material316L stainless steel
    OptionsEnhanced surface finishes and electropolishing
    Literature
    Back to Top